Cyclone 600 Upcut Saw

On most upcut saws, it’s easy to cycle the saw without powering up the motor. This can lead to operators running the unpowered blade into a piece of stock accidentally which can have devastating effects on the industrial saw's blade and spindle. We designed the RazorGage upcut saw so that it won’t cycle without motor power.  

On the work surface, our patented Safe T Crowders improve saw safety. The RazorGage upcut saw operator can crowd stock against the fence while safely cycling the saw via thumb-operated 2-hand anti-tie down buttons. Other upcut saws offer traditional 2-hand anti-tie down buttons mounted on the front of the saw. Since the operator’s hands are not available to crowd the material to the fence, pneumatic clamps must be added to both the left and right sides of the industrial saw blade. Both clamps must fire simultaneously creating a dangerous situation when one or the other of the clamps lands half on the part.  

We keep saw safety top of mind at RazorGage. On our Cyclone 600 saw, the operator still manually crowds the material to the fence but via the Safe T Crowder handles allowing him to crowd on the left, right, or both sides as he sees fit. The operator can do so while keeping his hands away from the industrial saw blade.

There is a 16” fence and table surface on both sides of the blade, allowing you to place your material on either side, depending on your needs. This upcut saw can be equipped with a low fence or high fence.

The Top Clamp travels on linear bearings and is driven by its own cylinder so you can adjust clamping speed and pressure independently. Quickly adjust the top clamp height with flip stops.